Effect of surfactants on the stability of thin liquid film flow on a rotating disk

The effect of surfactants on surface instabilities of thin liquid film flow on a rotating disk was studied at different flow rates Q (0.5相似文献   

Miniaturized monolithic disks for immunoadsorption of cardiac biomarkers from serum

Immunoadsorbers based on 2.0 × 6.0 mm i.d., epoxy-bearing, methacrylate-based monolithic disks were developed in order to target myoglobin and N-terminal pro-natriuretic peptide (NT-proBNP), two biomarkers involved in cardiovascular disease. In both cases, antibodies were successfully coupled to the polymeric disk material. The developed immunoadsorbers permitted the selective isolation of myoglobin and NT-proBNP from human serum. Myoglobin was successfully isolated and detected from serum samples at concentrations down to 250 fmol μL⁻¹. However, the affinity of the antibodies was not sufficient for the analysis of low-concentration clinical samples. Frontal analysis of anti-NT-proBNP disks revealed the ability of the immunoadsorber to bind up to 250 pmol NT-proBNP, which is more than sufficient for the analysis of clinical samples. Anti-NT-proBNP disks showed good stability over more than 18 months and excellent batch-to-batch reproducibility. Moreover, anti-NT-proBNP disks permitted the isolation of NT-proBNP at concentrations down to 750 amol μL⁻¹ in serum, corresponding to concentrations of strongly diseased patients. Using reversed-phase trapping columns, the detection of NT-proBNP eluted from immunoadsorbers by mass spectrometry was achieved for concentrations down to 7.8 fmol μL⁻¹.     

Liquid–solid disk extraction followed by supercritical fluid elution and gas chromatography of phenols from water

A method combining the techniques of liquid – solid disk extraction (LSDE) and supercritical fluid elution (SFE) has been developed for the phenols regulated by the Clean Water Act. LSDE uses a disk or membrane made of polytetrafluoroethylene (PTFE) fibrils impregnated with small particles, e.g. styrene divinylbenzene (SDB) resin, to extract phenols from water. After disk extraction the retained analytes are eluted from the disk using SFE. SFE is used as an alternative to liquid solvent elution with an organic solvent. Analytes are separated, identified, and quantified using gas chromatography – ion trap detector mass spectrometry (GC-ITDMS). The method is capable of sub parts per billion detection limits, and precision of 5–28% RSD. Evaluation of various disks or membranes, such as C₁₈-silica disks, SDB disks, and ion exchange membranes, has also been performed for the extraction of phenols from water. The results obtained from the in-situ aqueous acetylation of phenols and extraction of their acetates are quantitative. The utilization of LSDE and SFE techniques has proven to be a more effective approach than liquid – liquid extraction in minimizing air pollution and solvent waste.     

电化学方法研究I3^—和Ti^3＋在铂上的异相催化

用电化学方法研究了Ｉ－３和Ｔｉ３＋在还原铂表面上的电极反应，由此计算出Ｉ－３与Ｔｉ３＋在还原铂表面上的混合催化反应速率（νｍｉｘ）．当混合催化电位（Ｅｍｉｘ）位于极限电流区时，νｍｉｘ对［Ｔｉ３＋］为零级反应，对［Ｉ－３］为一级反应，且正比于电极旋转速率的平方根，Ｈ＋浓度影响不大．由动力学方法研究的结果证实了电化学研究结果的正确性，致使可用电化学方法解释溶液中的异相催化问题     

多支链烷基苯磺酸钠水溶液的表面性质

用自制的四种高纯度多支链烷基苯磺酸钠,研究了支链结构对其表面性质的影响.结果表明,随支链烷基碳数增加,临界胶束浓度降低,标准吸附自由能DGadӨ更负;但是,饱和吸附量Γmax却随支链烷基碳数增加而减小,且临界胶束浓度时的表面张力γcmc随吸附量减小而降低,表现出与一般表面活性剂不同的变化趋势.从多支链烷基苯磺酸钠的分子结构特点,解释了随支链烷基碳数增加Γmax和γcmc的变化规律,探讨了分子的独占面积(as)对Γmax及γcmc的影响.     

Preconcentration and Determination of Chromium Species Using Octadecyl Silica Membrane Disks and Flame Atomic Absorption Spectrometry

A novel and selective method for the fast determination of trace amounts of chromium species in water samples has been developed. The procedure is based on the selective formation of chromium diethyldithiocarbamate complexes at different pH in the presence of Mn(II) as an enhancement agent of chromium signals followed by elution with organic eluents and determination by atomic flame absorption spectrometry. The maximum capacity of the employed disks was found to be (396±3) µg and (376±2) µg for Cr(III) and Cr(VI), respectively. The detection limit of the proposed method is 49 and 43 ng·L^?1 for Cr(III) and Cr(VI), respectively. The proposed method was successfully applied for determination of chromium species Cr(III) and Cr(VI) in different water samples.     

Influence of the nature of membrane ionogenic groups on water dissociation and electrolyte ion transport: A rotating membrane disk study

Polarization properties of electromembrane systems (EMS) consisting of a heterogeneous membrane, either the MK-41 phosphonic acid membrane or the MK-40 sulfonic acid membrane, and dilute sodium chloride solutions are investigated with the rotating membrane disk method. For the MK-41/0.01 M NaCl and MK-41/0.001 M NaCl EMS, effective ion transport numbers and partial current-voltage curves (CVC) are measured for sodium and hydrogen ions, and limiting-current densities and the diffusion-layer thickness are calculated as functions of the rotation rate of the membrane disk. With the theory of the overlimiting state of EMS, internal parameters of the systems under investigation—the diffusion-layer thickness, the space-charge distribution, and electric-field strengths in the diffusion layer and in the membrane—are calculated from experimentally obtained CVC and the dependence of effective transport numbers on current density. The catalytic influence of ionogenic groups on the dissociation rate of water is analyzed quantitatively. Partial CVC for H⁺ ions are calculated for the space-charge region in MK-40 and MK-41 membranes. Analogous CVC for bipolar membranes containing sulfonic acid and phosphonic acid groups are compared. The dissociation mechanism of water is the same in all EMS and is independent of the membrane type and the nature of the functional groups.     

Using the rotating disk electrode for evaluating film porosity of conductive polymers

Conductive polymer (poly-o-phenylenediamine and poly-3-methylthiophene) films were synthesized on a rotating disk electrode. Dependences of the limiting penetration currents on the nature of the polymer and film thickness were obtained in solutions containing electroactive substances (hydroquinone, quinone) reducing or oxidiring at redox potentials beyond the range of polymer electroactivity (selected by adjusting the pH value). The transport of hydroquinone and quinone test species through the pores in polymer films was examined based on the results of these studies, and the degree of film porosity was evaluated.     

Solid phase extraction of copper (II) by sorption on octadecyl silica membrane disk modified with a new Schiff base and determination with atomic absorption spectrometry

A simple, selective and reliable method for rapid extraction and determination of trace amounts of Cu (II) ions from aqueous samples using octadecyl-bonded silica membrane disks modified with bis-(3-methoxy salicylaldehyde)-1,6-diaminohexane and flame atomic absorption spectrometry (FAAS) is presented. Extraction efficiency, the influence of pH, flow rates, amount of ligand, and type and least amount of eluant were investigated. The linear dynamic range of the proposed method for Cu (II) ions was found in a wide concentration range of 1.0 (± 0.2)–150 (± 2) μg l^− 1. The detection limit and preconcentration factor of this method were found 30.0 (± 0.7) ng l^− 1 and 100 respectively. The reproducibility of the procedure is at the most 2.0%. The effects of various cationic interferences on the percent recovery of copper ion were studied. The method was used to the recovery of copper ion from different synthetic, alloys and biological samples.     

Elastic Analysis of Anisotropic Functionally Graded Rotating Disks With Non-Uniform Thicknesses北大核心CSCD

研究了任意梯度变化的变厚度各向异性转动圆盘的弹性问题.假设圆盘绕刚性轴匀速转动,其材料性能和厚度沿径向任意梯度变化.考虑圆盘在中心转轴处受位移约束,外侧自由,根据各向异性转动圆盘的平衡微分方程,得到关于径向应力的Fredholm积分方程,继而通过对Fredholm积分方程进行数值求解,得到结构的位移场和应力场.对具体梯度变化情况仅需代入相应梯度变化进行求解即可.数值算例部分,通过假设厚度、弹性模量等参数为特殊的幂函数形式,将由Fredholm积分方程求出的数值解与对应的精确解进行对比,以及针对常见的Voigt模型,将由该方法算得的数值解和ANSYS有限元计算结果进行对比,验证了该方法的准确性和精度.其次,针对Voigt模型,重点分析了厚度变化、材料性能梯度参数、各向异性度等对应力场和位移场的影响.提出了针对材料性能和厚度沿径向呈任意梯度变化的圆盘结构弹性分析方法,将为优化功能梯度圆盘的结构和材料参数、有效调整构件应力分布、提高结构安全性,提供强有力的工具;算例分析结果对功能梯度圆盘在复杂条件下的结构安全设计有重要的理论指导意义.